Step 3: Pairing Module With Your PC and Print. - Power ON the 3D printer (you should see blinking red LED if BT module is ON, a good sign). - Just add a new Bluetooth device from Windows settings and pair to your Bluetooth device; - A new virtual COM port will be created (open device manager to find out to which COM port we need to connect to
USB Bluetooth Adapter. A. Insert USB Bluetooth adapter into the USB port of your laptop. B. To install the Bluetooth driver, go here. 3. PCI-E Wi-Fi adapter. We take PCE-AX58BT WiFi adapter and ASUS STRIX Z590-A GAMING motherboard for example. Notice:Before installation, please turn off your PC, unplug the power cord, and remove side panel of
Step 2: Making Everything Fit. I now removed all excess material form the dongle and cable. The metal part of the plug was removed and the plastic was sanded down leaving a step just large enough to accommodate the usb of the dongle (the dongle had a half thickness usb) it was then taped together with self amalgamating tape. Llza. 355 190 347 252 368 249 363 375 271